10 kVA 50 kV AC DC Hipot Tester

10kVA 50kV is a simple-to-use AC DC Hipot Tester with the built-in ability to test Ground Continuity (Low Current Continuity). You need a Hipot Tester that includes all the features you need to get the job done, the 296 has what you’re looking for. Make testing simple with common sense security settings. PLC Remote allows you to make AC Hipot Testing safer with Personal Protective Equipment (PPE).

Hipot tester


  • 10 kVAC DC Hipot (Model 19071 AC only)
  • Insulation resistance 1 Megohm to 50 Gigohms, up to 1 kV test voltage (Model 19073)
  • Model 19071 is a direct replacement for QuadTech Sentry 10 Plus. Model 19073 is a direct replacement for Quadtech Sentry 30 Plus.
  • Ground continuity check
  • Open Short Check (OSC) function
  • GFI shutdown the instrument when imbalance current >0.5 mA
  • Flashover (ARC) detection
  • Quick discharge of DUT in IR and DC test modes
  • Pause mode
  • Large LCD display (240 x 64 dots matrix)
  • Programmable ramp/fall and test time
  • Programmable high/low limit
  • Save/Recall program test function
  • Available with remote control and serial interface


When removing the test lead from any end of the DUT, be sure to turn off the power output, otherwise there is a danger of electric shock.


Capacity10 kVA
Input Voltage110V/ 120V/ 220V
Frequency50Hz/ 60Hz
Output Voltage50 kV
Current200 mA
DC Output70 kV
Phase1 Phase
Weight (Transformer + Control Box)107 kg
Cooling MethodDry
Impedance Voltage<12%
Surface Temperature Raising< 55°C
No Load Current< 4%
Output Voltage WaveformSine Wave
UsageAC DC Hipot Tester
Warranty12 Months
Temperature Environment0~40°C
Relative Humidity<85%

Packing List

1Hipot Test Set (1 Control Box + 10 kVA Dry Transformer)1
2Power Supply Cable1
3Earth Cable1
4Connecting Line1
6Rectifying Diode1
7User Manual1