5kV AC DC hipot tester, output voltage is output through the regulator, featuring high reliability and high durability. As the launch of the national security standard, voltage withstand instrument has become one of necessary withstand test instruments to the radio and electronic products manufacturer.
Features
- 5 kVAC DC Hipot (Model 19071 AC only)
- Insulation resistance 1 Megohm to 50 Gigohms, up to 1 kV test voltage (Model 19073)
- Model 19071 is a direct replacement for QuadTech Sentry 10 Plus. Model 19073 is a direct replacement for Quadtech Sentry 30 Plus.
- Ground continuity check
- Open Short Check (OSC) function
- GFI shutdown the instrument when imbalance current >0.5 mA
- Flashover (ARC) detection
- Quick discharge of DUT in IR and DC test modes
- Pause mode
- Large LCD display (240 x 64 dots matrix)
- Programmable ramp/fall and test time
- Programmable high/low limit
- Save/Recall program test function
- Available with remote control and serial interface
Specifications
| Model | ATO-HTGTB-350 |
| Capacity | 3 kVA |
| Input Voltage | 110V/ 120V/ 220V |
| Frequency | 50Hz/ 60Hz |
| Output Voltage | 50 kV |
| Current | 60 mA |
| DC Output | 70 kV |
| Phase | 1 Phase |
| Weight (Transformer + Control Box) | 48 kg |
| Cooling Method | Dry |
| Effeciency | 90% |
| Impedance Voltage | <12% |
| Surface Temperature Raising | < 55°C |
| No Load Current | < 4% |
| Output Voltage Waveform | Sine Wave |
| Usage | AC DC Hipot Tester |
| Warranty | 12 Months |
| Temperature Environment | 0~40°C |
| Altitude | <2000m |
| Relative Humidity | <85% |
Packing List
| NO. | Description | Quantity |
| 1 | Hipot Test Set (1 Control Box + 3 kVA Dry Transformer) | 1 |
| 2 | Power Supply Cable | 1 |
| 3 | Earth Cable | 1 |
| 4 | Connecting Line | 1 |
| 5 | Fuse | 3 |
| 6 | Rectifying Diode | 1 |
| 7 | User Manual | 1 |