5 kVA 100kV AC DC hipot testers are for general- purpose HV test operation. It can be widely used for voltage withstand test in electrician’s assistant instrument, rubber-wooden facility, voltage converter, wires , power meter, motor, power supply plug, cables and all kinds of electronic and electric products.
Features
- 5 kVA AC DC Hipot (Model 19071 AC only)
- Insulation resistance 1 Megohm to 50 Gigohms, up to 1 kV test voltage (Model 19073)
- Model 19071 is a direct replacement for QuadTech Sentry 10 Plus. Model 19073 is a direct replacement for Quadtech Sentry 30 Plus.
- Ground continuity check
- Open Short Check (OSC) function
- GFI shutdown the instrument when imbalance current >0.5 mA
- Flashover (ARC) detection
- Quick discharge of DUT in IR and DC test modes
- Pause mode
- Large LCD display (240 x 64 dots matrix)
- Programmable ramp/fall and test time
- Programmable high/low limit
- Save/Recall program test function
- Available with remote control and serial interface
Specifications
| Model | ATO-HTGTB-5100 |
| Capacity | 5 kVA |
| Input Voltage | 110V/ 120V/ 220V |
| Frequency | 50Hz/ 60Hz |
| Output Voltage | 100 kV |
| Current | 50 mA |
| DC Output | 140 kV |
| Phase | 1 Phase |
| Weight (Transformer+Control Box) | 90 kg |
| Cooling Method | Dry |
| Effeciency | 90% |
| Impedance Voltage | <12% |
| Surface Temperature Raising | < 55°C |
| No Load Current | < 4% |
| Output Voltage Waveform | Sine Wave |
| Usage | AC DC Hipot Tester |
| Warranty | 12 Months |
| Temperature environment | 0~40°C |
| Altitude | <2000m |
| Relative Humidity | <85% |
Packing List
| NO. | Description | Quantity |
| 1 | Hipot Test Set (1 Control Box + 5 kVA Dry Transformer) | 1 |
| 2 | Power Supply Cable | 1 |
| 3 | Earth Cable | 1 |
| 4 | Connecting Line | 1 |
| 5 | Fuse | 3 |
| 6 | Rectifying Diode | 1 |
| 7 | User Manual | 1 |