As an important branch of instrumentation, Hipot tester has a wide range of applications, covering industry, agriculture, transportation, science and technology, environmental protection, national defense, aerospace and daily life. Usually, industrial process gas monitoring and analysis instruments are classified into the field of analytical instruments. Common withstand voltage testers are usually miniaturized, portable or fixed, independent work or networked, and are widely used in petroleum, chemical, metallurgy, mining, pharmaceuticals, semiconductors Processing, spraying and packaging and other industrial sites and households, shopping malls, liquefied gas stations, gas stations, gas stations and other civil/commercial places that require fire and explosion prevention, poisoning, and air pollution, as well as agricultural greenhouse gas detection, biogas analysis and biogas safety monitoring and Environmental emergency accidents, attacks, storage and transportation of dangerous goods, etc.
Intermediate relay menu: The test of AC/DC intermediate relay, intermediate relay action value, return value, return coefficient, action time, return time and hold value can be completed at one time. The start mode and hold type can be set.
Measuring instrument calibration menu: It can complete the calibration of voltage, current, power, power factor and other measuring meters. Through the setting of PT and CT transformation ratio, theprimary and secondary parameter values can be displayed synchronously.
Hipot tester can use the test weight method or the influence coefficient method provided by the system to perform dynamic balance correction, and the system will automatically calculate the mass size and
angle of the plus (minus) counterweight. In many cases, a dynamic balance correction can remove more than 90% of the unbalance of the rotor (shafting).
Before powering up a system, verifying that it is healthy can improve system performance using insulation testing; insulation testing can uncover manufacturing process issues and equipment defects that would normally go undetected until the equipment fails. In the EU, the test is mandatory, even for small civilian systems.