Common faults of DC Hipot test: When the power switch of hipot tester is turned on, the digital indicator on the control box does not light up. Please check the power connection and all the fuses. If the fuse is damaged, please replace it with a new one according to the amperage marked beside the …
There is no power indicator when the machine is turned on, and the display does not light up. Please check whether the power supply is normal. If it is not normal, please check whether there is 220V and whether it conforms to the normal use range of the hipot tester. Please check whether the fuse …
The problems in the following conditions are very dangerous. The output terminal may still have high voltage output even the [STOP] button is pressed, so you need to be very careful. The DANGER indicator still lights up after the [STOP] button is pressed. There is no reading on voltage meter, however the DANGER indicator is …
